Melt-Flow Standards
|
| |
| These Standard Reference Materials are intended primarily
for use in calibration and performance evaluation of instruments used
in polymer technology and science for the determination of the melt
flow rate using ASTM method D 1238B.
|
| |
| |
| SRM |
Material |
Melt-flow rate(g/10 min) |
| 1473b |
Polyethylene resin, low density |
1.13 |
| 1474a |
Polyethylene resin |
5.10 |
| 1475a |
Polyethylene, linear (whole polymer) |
2.02 |
| 1496 |
Unpigmented polyethylene resin |
0.26 |
| 1497 |
Pigmented polyethylene resin |
0.19 |
|
| |
| |
| Standard Reference Materials may be ordered from the
Standard Reference Materials Program Office at NIST. |
| |
| A Standard Reference Materials catalog
may be viewed here. |
| |
| |
| |
| |
| |
| NIST Materials Science & Engineering
Laboratory - Polymers Division |
|
|
|
